Changing Default LAN IP Address in Vigor2860/Vigor2925
Posted by Roy Panetta on 23 October 2014 11:45 AM

This guide will show you how to change the default LAN IP address for a LAN if the new IP address conflicts with an existing IP address for another LAN in the router. The router will have pre-configured default LAN settings.

This document that shows the steps required to change LAN1 subnet to
By default LAN2 uses so we need to change LAN2 settings first before we can change LAN1.
In the process we need to enable VLANS. Make the changes and then disable VLANs when finished.



Step 1: Enable VLAN setting


Go to LAN>>VLAN Configuration menu


Assign all the LAN ports and Wi-Fi LANS to a VLAN and save settings


Note: you will need to assign all LAN ports and SSID’s to a VLAN or the configuration cannot be saved.


Step 2: Change LAN2 IP subnet settings

Original Setting


Step 2.1: Change LAN 2 IP subnet to


LAN settings now should look like this:

LAN 1 has IP address

LAN2 has IP address




Step 3: Change LAN1 IP subnet settings


LAN settings should look like this now:




Step 4: Disable VLAN settings


Go to LAN>>VLAN Configuration menu and disable VLAN settings


LAN1 subnet now is changed to





(4 vote(s))
Not helpful

Comments (0)