SEARCH
RSS Feed
Knowledgebase : Vigor2760
(13)WAN
Configuring Vigor2760 Delight for Ethernet WAN Connection
Configuring Vigor2760 Delight for DoDo NBN Connection
(1)LAN
Enabling 2nd Subnet and VLAN in Vigor2760 Router
(8)VPN
How to setup remote dial-in VPN connection on Vigor2760
How to setup GRE over IPSec LAN to LAN VPN Tunnel on Vigor2760
(6)Firewall
How to Restrict some HTTP and HTTPS Web Sites for Wi-Fi Guest Users
Protecting your Vigor2960 and Vigor3900 from Malware Attacks
    

Connecting DrayTek Broadband Routers to Optus Cable Service
  This application note shows you how to configure the Optus supplied Netgear modem into bridge mode to interface Draytek broadband routers to Optus cable service. APPLICABLE DRAYTEK ROUTERS DrayOS Routers Vigor2860, Vigor2925, Vigor2760, Vigor283...
How to connect Android VPN L2TP/IPsec to DrayTek Vigor router?
This will apply DV2760, DV2860, DV2912, DV2832, DV2925, DV2952, DV3220, and DV2120 In this configuration, we used a Samsung Galaxy S7 ver 6.0.1 Marshmallow and DV2860Ln firmware ver 3.8.4.2 1.) configure the IPsec General Setup navigate to "VPN and Re...
How to Disable the WLAN ON/OFF/WPS Switch in Vigor Wireless Route...
Some customers may lose Wi-Fi access in the Vigor Wi-Fi routers and access points due to the WLAN ON/OFF/WPS switch on the side of the router or access point being accidentally pressed. To overcome this DrayTek have added a feature in routers and Accsss P...
How to configure LAN to LAN VPN Tunnel to Route all Internet Traf...
This application note describes how to route all internet traffic via the Private Internet Access (PIA) VPN service using LAN to LAN VPN tunnel configuration. This configuration applies to DrayOS routers (DV2760, DV2912, DV2860, DV2925, DV2952, and DV3220...